Frames and Housings
Inner Seal Housings
Inner seal housings are designed to hold multiple stages of filtration. Filter housings are rated to +/- 6”WG and 0.5” leakage at 125% of standard rated flow. Higher pressure designs are available for specific applications. Inner Seal Housings are the best fit in Gun Ranges, Health Care, and other general HVAC environments.
Seal V-Bank Housing
Aerostar Seal V-bank housing can replace any existing filter housing. It is designed for use with any 2" or 4" filter. This housing can be used in any application where there is a need for air filtration.
Carbon Sorb Housing
The Aerostar Carbon Sorb Housing is a multistage unit designed to remove particulate and gaseous contaminants. The housing will hold 2" or 4" pleated pre-filters and 3/4" refillable carbon trays
HEPA Bolt-Seal Housing
The Aerostar HEPA Bolt-Seal Housing is an economy multistage unit designed to hold HEPA filters in 95%, 99.97% and 99.99% efficiency at 0.3-micron size particles with either a gasket or fluid seal. The Bolt-Seal Housing is commonly used in food processing, pharmaceutical, and biotechnology environments.
HEPA Crank- Seal Housing
The Aerostar HEPA Crank-Seal Housing is a multistage unit designed to hold HEPA filters in 95%, 99.97% and 99.99% efficiency at 0.3-micron size particles with either a gasket or fluid seal.
HEPA Seal Frame
The Aerostar HEPA Seal Frame is a holding frame that can be used to hold individual filters, or for multiple banks holding a 5 7/8" or 11 1/2" HEPA filter.
HEPA Bag-In Bag-Out Housing (BIBO)
The Aerostar HEPA Seal Bag In/Bag Out Housing is a single or multistage unit designed to hold HEPA filters in 99.97% and 99.99% efficiency at 0.3-micro n size particles with either a gasket or fluid seal.
Isolation Room Containment System (IRCS)
Isolation Room Containment System (IRCS) is a self-contained unit designed to meet the CDC’s guidelines by providing high-efficieny filtration for small contamination areas. The IRCS consists of two components, a BIBO housing and a dedicated fan unit on a channel base.
Pad Holding Frames
The Aerostar® Pad Holding Frame is a holding frame this is used to hold media pads. The frame can be used for new installations or upgrades of existing systems. It is designed for changing dirty pads quickly, safely and efficiency.